| Opcode/Instruction | Op/En | 64/32 bit Mode Support | CPUID Feature Flag | Description |
|---|---|---|---|---|
|
0F EB /r1 POR mm, mm/m64 |
RM | V/V | MMX | Bitwise OR of mm/m64 and mm. |
|
66 0F EB /r POR xmm1, xmm2/m128 |
RM | V/V | SSE2 | Bitwise OR of xmm2/m128 and xmm1. |
|
VEX.NDS.128.66.0F.WIG EB /r VPOR xmm1, xmm2, xmm3/m128 |
RVM | V/V | AVX | Bitwise OR of xmm2/m128 and xmm3. |
|
VEX.NDS.256.66.0F.WIG EB /r VPOR ymm1, ymm2, ymm3/m256 |
RVM | V/V | AVX2 | Bitwise OR of ymm2/m256 and ymm3. |
NOTES:
1. See note in Section 2.4, “Instruction Exception Specification” in the Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 2A and Section 22.25.3, “Exception Conditions of Legacy SIMD Instructions Operating on MMX Registers” in the Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 3A.
| Op/En | Operand 1 | Operand 2 | Operand 3 | Operand 4 |
| RM | ModRM:reg (r, w) | ModRM:r/m (r) | NA | NA |
| RVM | ModRM:reg (w) | VEX.vvvv (r) | ModRM:r/m (r) | NA |
Performs a bitwise logical OR operation on the source operand (second operand) and the destination operand (first operand) and stores the result in the destination operand. Each bit of the result is set to 1 if either or both of the corresponding bits of the first and second operands are 1; otherwise, it is set to 0.
In 64-bit mode, using a REX prefix in the form of REX.R permits this instruction to access additional registers (XMM8-XMM15).
Legacy SSE version: The source operand can be an MMX technology register or a 64-bit memory location. The destination operand is an MMX technology register.
128-bit Legacy SSE version: The second source operand is an XMM register or a 128-bit memory location. The first source and destination operands can be XMM registers. Bits (VLMAX-1:128) of the corresponding YMM destination register remain unchanged.
VEX.128 encoded version: The second source operand is an XMM register or a 128-bit memory location. The first source and destination operands can be XMM registers. Bits (VLMAX-1:128) of the destination YMM register are zeroed.
VEX.256 encoded version: The second source operand is an YMM register or a 256-bit memory location. The first source and destination operands can be YMM registers.
Note: VEX.L must be 0, otherwise the instruction will #UD.
POR (128-bit Legacy SSE version)
DEST ← DEST OR SRC DEST[VLMAX-1:128] (Unmodified)
VPOR (VEX.128 encoded version)
DEST ← SRC1 OR SRC2 DEST[VLMAX-1:128] ← 0
VPOR (VEX.256 encoded version)
DEST ← SRC1 OR SRC2
POR:
__m64 _mm_or_si64(__m64 m1, __m64 m2)
(V)POR:
__m128i _mm_or_si128(__m128i m1, __m128i m2)
VPOR:
__m256i _mm256_or_si256 ( __m256i a, __m256i b)
None.
None.
See Exceptions Type 4; additionally
| #UD | If VEX.L = 1. |