| Opcode/Instruction | Op/En | 64/32 bit Mode Support | CPUID Feature Flag | Description |
|---|---|---|---|---|
|
0F EC /r1 PADDSB mm, mm/m64 |
RM | V/V | MMX | Add packed signed byte integers from mm/m64 and mm and saturate the results. |
|
66 0F EC /r PADDSB xmm1, xmm2/m128 |
RM | V/V | SSE2 | Add packed signed byte integers from xmm2/m128 and xmm1 saturate the results. |
|
0F ED /r1 PADDSW mm, mm/m64 |
RM | V/V | MMX | Add packed signed word integers from mm/m64 and mm and saturate the results. |
|
66 0F ED /r PADDSW xmm1, xmm2/m128 |
RM | V/V | SSE2 | Add packed signed word integers from xmm2/m128 and xmm1 and saturate the results. |
| VEX.NDS.128.66.0F.WIG EC /r VPADDSB xmm1, xmm2, xmm3/m128 | RVM | V/V | AVX | Add packed signed byte integers from xmm3/m128 and xmm2 saturate the results. |
|
VEX.NDS.128.66.0F.WIG ED /r VPADDSW xmm1, xmm2, xmm3/m128 |
RVM | V/V | AVX | Add packed signed word integers from xmm3/m128 and xmm2 and saturate the results. |
|
VEX.NDS.256.66.0F.WIG EC /r VPADDSB ymm1, ymm2, ymm3/m256 |
RVM | V/V | AVX2 | Add packed signed byte integers from ymm2, and ymm3/m256 and store the saturated results in ymm1. |
|
VEX.NDS.256.66.0F.WIG ED /r VPADDSW ymm1, ymm2, ymm3/m256 |
RVM | V/V | AVX2 | Add packed signed word integers from ymm2, and ymm3/m256 and store the saturated results in ymm1. |
NOTES:
1. See note in Section 2.4, “Instruction Exception Specification” in the Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 2A and Section 22.25.3, “Exception Conditions of Legacy SIMD Instructions Operating on MMX Registers” in the Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 3A.
| Op/En | Operand 1 | Operand 2 | Operand 3 | Operand 4 |
| RM | ModRM:reg (r, w) | ModRM:r/m (r) | NA | NA |
| RVM | ModRM:reg (w) | VEX.vvvv (r) | ModRM:r/m (r) | NA |
Performs a SIMD add of the packed signed integers from the source operand (second operand) and the destination operand (first operand), and stores the packed integer results in the destination operand. See Figure 9-4 in the Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 1, for an illustration of a SIMD operation. Overflow is handled with signed saturation, as described in the following paragraphs.
The PADDSB instruction adds packed signed byte integers. When an individual byte result is beyond the range of a signed byte integer (that is, greater than 7FH or less than 80H), the saturated value of 7FH or 80H, respectively, is written to the destination operand.
The PADDSW instruction adds packed signed word integers. When an individual word result is beyond the range of a signed word integer (that is, greater than 7FFFH or less than 8000H), the saturated value of 7FFFH or 8000H, respectively, is written to the destination operand.
These instructions can operate on either 64-bit, 128-bit or 256-bit operands. When operating on 64-bit operands, the destination operand must be an MMX technology register and the source operand can be either an MMX tech-nology register or a 64-bit memory location. In 64-bit mode, using a REX prefix in the form of REX.R permits this instruction to access additional registers (XMM8-XMM15).
128-bit Legacy SSE version: The first source operand is an XMM register. The second operand can be an XMM register or a 128-bit memory location. The destination is not distinct from the first source XMM register and the upper bits (VLMAX-1:128) of the corresponding YMM register destination are unmodified.
VEX.128 encoded version: The first source operand is an XMM register. The second source operand is an XMM register or 128-bit memory location. The destination operand is an XMM register. The upper bits (VLMAX-1:128) of the corresponding YMM register destination are zeroed.
VEX.256 encoded version: The first source operand is a YMM register. The second source operand is a YMM register or a 256-bit memory location. The destination operand is a YMM register.
Note: VEX.L must be 0, otherwise the instruction will #UD.
PADDSB (with 64-bit operands)
DEST[7:0] ← SaturateToSignedByte(DEST[7:0] + SRC (7:0]);
(* Repeat add operation for 2nd through 7th bytes *)
DEST[63:56] ← SaturateToSignedByte(DEST[63:56] + SRC[63:56] );
PADDSB (with 128-bit operands)
DEST[7:0] ←SaturateToSignedByte (DEST[7:0] + SRC[7:0]);
(* Repeat add operation for 2nd through 14th bytes *)
DEST[127:120] ← SaturateToSignedByte (DEST[111:120] + SRC[127:120]);
VPADDSB (VEX.128 encoded version)
DEST[7:0] ← SaturateToSignedByte (SRC1[7:0] + SRC2[7:0]);
(* Repeat subtract operation for 2nd through 14th bytes *)
DEST[127:120] ← SaturateToSignedByte (SRC1[111:120] + SRC2[127:120]);
DEST[VLMAX-1:128] ← 0
VPADDSB (VEX.256 encoded version)
DEST[7:0] ← SaturateToSignedByte (SRC1[7:0] + SRC2[7:0]);
(* Repeat add operation for 2nd through 31st bytes *)
DEST[255:248]← SaturateToSignedByte (SRC1[255:248] + SRC2[255:248]);
PADDSW (with 64-bit operands)
DEST[15:0] ← SaturateToSignedWord(DEST[15:0] + SRC[15:0] );
(* Repeat add operation for 2nd and 7th words *)
DEST[63:48] ← SaturateToSignedWord(DEST[63:48] + SRC[63:48] );
PADDSW (with 128-bit operands)
DEST[15:0] ← SaturateToSignedWord (DEST[15:0] + SRC[15:0]);
(* Repeat add operation for 2nd through 7th words *)
DEST[127:112] ← SaturateToSignedWord (DEST[127:112] + SRC[127:112]);
VPADDSW (VEX.128 encoded version)
DEST[15:0] ← SaturateToSignedWord (SRC1[15:0] + SRC2[15:0]);
(* Repeat subtract operation for 2nd through 7th words *)
DEST[127:112] ← SaturateToSignedWord (SRC1[127:112] + SRC2[127:112]);
DEST[VLMAX-1:128] ← 0
VPADDSW (VEX.256 encoded version)
DEST[15:0] ← SaturateToSignedWord (SRC1[15:0] + SRC2[15:0]);
(* Repeat add operation for 2nd through 15th words *)
DEST[255:240] ← SaturateToSignedWord (SRC1[255:240] + SRC2[255:240])
PADDSB:
__m64 _mm_adds_pi8(__m64 m1, __m64 m2)
(V)PADDSB:
__m128i _mm_adds_epi8 ( __m128i a, __m128i b)
VPADDSB:
__m256i _mm256_adds_epi8 ( __m256i a, __m256i b)
PADDSW:
__m64 _mm_adds_pi16(__m64 m1, __m64 m2)
(V)PADDSW:
__m128i _mm_adds_epi16 ( __m128i a, __m128i b)
VPADDSW:
__m256i _mm256_adds_epi16 ( __m256i a, __m256i b)
None.
None.
See Exceptions Type 4; additionally
| #UD | If VEX.L = 1. |